Digital Engineering Workshop 5th Japan-Korea CAD/CAM Workshop
Organized by AIST (National Institute of Advanced Industrial Science and Technology, Japan
Cosponsored by Japan Society for Mechanical Engineers, Design & System Division
Supported by EPSON International Scholarship Foundation
RCAST, The University of Tokyo, Komaba, Meguro, Tokyo, JAPAN Feb. 24 and 25, 2005
http://www.den.rcast.u-tokyo.ac.jp/dews2005
AIM and SCOPE
IJCC (Int. Journal of CAD/CAM) Workshop on Digital Engineering will be held
in Japan on Feb. 24-25, 2005. This workshop is also the 5th Korea Japan
CAD/CAM workshop whose former workshops have been held, every year,
alternatively in Korea and Japan since 2000. This time the workshop will
provide an international forum for researchers and practitioners in the field of
digital engineering so as to facilitate sharing recent research results/trend
among the participants. Topics for the workshop include, but are not limited
to, the following:
• Geometric Modeling
• Surface Reconstruction
• Rapid Prototyping
• Mesh Generation
• Tool Path Generation
• Feature Technology
• Computer Aided Process Planning
• Reverse Engineering
• Concurrent Engineering
• Product Data Exchange
• Virtual Reality Applications
• Virtual Manufacturing
• Virtual Prototyping
• Design for Manufacturing
• Web based design collaboration
• Artificial Intelligence for CAD/CAM
• Software engineering issues for CAx
• Industrial Applications of CAD/CAM
• Education for CAD/CAM
• Reasoning System for Design
• Creative Design
• Tools for Creative Design
• Service Engineering
• Methodology for Service Design
• Tools for Service Design
• Design for Sustainability
• Design for Environment
• Other emerging topic
Papers
Full papers (about 6,000 words) and short papers (about 2,000 words)
containing original and unpublished results in English are solicited.
The short papers shall also present young ideas, experimental trials and
industrial experiences. Submission of papers means that one of the authors
will register to the workshop and present the paper if accepted.
Journal publication
It is planned that excellent full papers will be recommended for publication in
Int. Journal of CAD/CAM (www.ijcc.org) as a special issue.
Submission
Email papers to Hiromasa Suzuki by
Sept. 10th, 2004. Acceptable file formats are MS Word, PostScript, PDF.
Detailed information about formatting and submitting papers are available on
the conference Web page:
http://www.den.rcast.u-tokyo.ac.jp/dews2005
Important Dates
September 10, 2004 Papers due
November 1, 2004 Notification of acceptance
December 15, 2005 Camera ready papers due
February 23, 2005 Factory Visits
February 24-25, 2005 Conference
Organization
Workshop Chair
Dr. Kazuo Mori (AIST, Japan)
Program Co-Chairs
Prof. Hiromasa Suzuki (Univ. of Tokyo, Japan)
Prof. Soonhung Han (KAIST, Korea)
Organizing Committee Co-Chairs
Mr. Norio Matuski (AIST, Japan)
Prof. Yoshiki Shimomura (Univ. of Tokyo, Japan)
Program Committee
Prof. Hideyuki Ando (The Univ. of Tokyo, Japan)
Prof. Hideki Aoyama (Keio Univ., Japan)
Prof. Kazuhiro Aoyama (The Univ. of Tokyo, Japan)
Prof. Shuo-Yan Chou (National Taiwan Univ. of
Science & Technology, Taiwan)
Prof. Kikuo Fujita (Osaka Univ., Japan)
Prof. Hiroyuki Hiraoka (Chuo Univ., Japan)
Prof. Shi-Min Hu (Tsinghua Univ., China)
Prof. Masatomo Inui (Ibaraki Univ., Japan)
Prof. Deok-Soo Kim (Hanyang Univ., Korea)
Dr. Hyun Kim (ETRI, Korea)
Prof. Yong Se Kim (Sungkyunkwan Univ., Korea)
Prof. Kunwoo Lee (Seoul National Univ., Korea)
Prof. Weiyin Ma (City Univ. of Hong Kong,
Hong-Kong, China)
Mr. Norio Matsuki (AIST, Japan)
Prof. Tamotsu Murakami (The Univ. of Tokyo, Japan)
Prof. Masahiko Onosato (Hokkaido Univ., Japan)
Dr. Koichi Ootomi (Toshiba co., Japan)
Prof. Zhigeng Pan (Zhejiang Univ., Hangzhou, China)
Prof. Hayong Shin (KAIST, Korea)
Prof. Yoshiki Shimomura (The Univ. of Tokyo, Japan)
Prof. Nobuhiro Sugimura (Osaka Prefecture Univ., Japan)
Prof. Tetsuo Tomiyama (TU Delft, The Netherlands)
Prof. Yasushi Umeda (Tokyo Metropolitan Univ., Japan)
Dr. TaeSung Yoon (Open Knowledge, Japan)
Contact
All the queries concerning papers must be sent to the
program co-chair:
Hiromasa SUZUKI
RCAST (Research Center for Advanced Science and Technology),
The University of Tokyo
Komaba 4-6-1, Meguro-ku, Tokyo 153-8904, Japan
Tel:+81-(0)3-5452-5185, Fax:+81-(0)3-5452-5186
E-mail: ijcc@den.rcast.u-tokyo.ac.jp
For general enquiries concerning the conference,
please write to or email:
Norio MATSUKI
AIST (National Institute of Advanced Industrial Science and Technology)
Namiki 1-2-1, Tsukuba, Ibaraki 305-8564, Japan
Tel:+81-(0)29-861-7115, Fax:+81-(0)29-861-7129
E-mail: dews2005@m.aist.go.jp
 |
